No Products in the Cart
SCROLL DOWN AND FIND OUT HOW EASY IT IS WITH THE NEW RAMUC AQUATIC PAINT RANGE.
MAKE SURE THERE ARE NO MAJOR CRACKS OR HOLES IN YOUR POOL AND CONSULT A PROFESSIONAL TO REPAIR IF THERE ARE ANY DEFECTS.
A PRESSURE WASHER ABOVE 3200 PSI IS RECOMMENDED
REMOVE ANY REMAINING WATER, SAND, LEAVES, OLD PAINT ETC.
APPLY CLEAN AND PREP SOLUTION USING A GRADEN SPRAYER AND STIFF BROOM. ONCE COMPLETED, RINSE OUT WITH A GARDEN HOSE
TO DO THIS, TAPE A CLEAR PLASTIC IN MULTIPLE LOCATIONS AND WAIT A FEW HOURS. REMOVE THE PLASTIC AND INSPECT FOR CONDENSATION. IF PRESENT REPEAT UNTIL DRY
ONCE COMPLETELY DRY, COVER ANY VENTS, TILES AND ANY AREA WHERE PAINT IS NOT NEEDED
FIRST MIX PART A AND PART B SEPRATELY AND THEN TOGETHER IN A 1:1 RATIO.MIXING SHOULD BE DONE MECHANICALLY AND NOT BY HAND. THE PAINT SHOULD BE LEFT FOR ABOUT 20 MINS AFTER MIXING.
START PAINTING WITH A PAINTBRUSH IN AREAS HARDER TO REACH SUCH AS ROUND THE VENTS OR NEAR THE CORNERS.
USING A ROLLER, PAINT THE WALLS FIRST THEN THE FLOOR STARTING FROM THE DEEP.A SECOND COTE MAY BE NECESSARY DEPENDING ON THE FIRST
ALLOW 16-72 HOURS TO DRY FOR A SECOND COAT (IF NECESSARY). RAMUC RECOMMENDS 5 NON-RAINING DAYS BEFORE FILLING THE POOL WITH WATER.